Když v komunikaci mezi satelitním tunerem (satelitním přijímačem nebo televizorem) dojde k nějaké chybě, tak vyběhne okno, které zobrazí nějakou chybu.
Těchto chyb - hlášek, chybových kódů (error code) jsou desítky a vybrali jsme ty nejčastější. Jsou z komunikate GoSAT a dekódovacím systémem Irdeto. Předpokládám, že budou stejné pro všechny zařízení, která mají systém Irdeto.
V příjmu satelitní televize se mohou občas vyskytnout chyby způsobené nejrůznějšími vlivy. Satelitní přijímače Skylink READY dokáží tyto chyby rozpoznat a informovat diváka na televizní obrazovce prostřednictvím tzv. chybového hlášení. Toto hlášení se skládá z čísla chyby a stručného popisu.
Z praxe víme, že nejčastějším problémem jsou zastaralé klíče, které zasílá Skylink na kartu pro otevření programů (E19-4). To má obvykle dvě příčiny:
Chybový kód | Zobrazený text | Anglický popis chyby | Poznámka |
D00 | D00-4 Card In | Card In, card is a valid Irdeto Access Smart Card. | Smart Card |
E00 | E00-32 Service not scrambled | The currently watched service is not scrambled. No message will appear on the screen, the status will only be shown on the CA Status screen. | optional |
E01 | E01-32 Please insert CA Module | CAM Absent | optional |
E02 | E02-32 CA Module EEPROM Failure | CAM EE Corrupted | optional |
E03 | E03-32 CA Module Failure | CAM Hardware Error | optional |
E04 | E04-4 Please insert Smart Card | Card Out, Please insert Smart Card. | Smart Card |
E05 | E05-4 Unknown Smart Card | Unknown Card (non-Irdeto Access). | Smart Card |
E06 | E06-4 Smart Card Failure | Card Error, communications with Smart Card have failed. | Smart Card |
I07 | I07-4 Checking Smart Card | Card verifying. | Smart Card |
E14 | E14-32 Service is currently scrambled | The IRD has requested the CAM to descramble a service, but there are no ECMs present. This means that there are no ECMs being played out by the headend. | optional |
E16 | E16-4 Service is currently scrambled | The viewer is not entitled to watch this service because the product in the ECM playout is not on the Smart Card. | Smart Card |
E16 | E16-4 Playback is not allowed | Playback is not allowed, because the CA product for descrambling the content at recording is no longer on the Smart Card.. | Session Management DRM |
E17 | E17-13 Service is currently scrambled | The viewer is not entitled to watch this service because the Smart Card is rejected by the Smart Card Marriage function. | SC Marriage |
E18 | E18-4 Service is currently scrambled | The viewer is not entitled to watch this service due to a product blackout filter imposed by the Headend. | Smart Card |
E19 | E19-4 Service is currently scrambled | The viewer is not entitled to watch this service because the product entitlement on the Smart Card has expired. | Smart Card |
E20 | E20-4 Service is currently scrambled | The viewer is not entitled to watch this service due to a regional blackout filter imposed by the Headend. | Smart Card |
E21 | E21-4 Service is currently scrambled | The viewer is not entitled to watch this service due to a user filter imposed by the Headend. | Smart Card |
D22 | D22-12 Event Purchased | The current event of the currently watched service is an IPPV event, and it has been purchased. | IPPV |
D23 | D23-12 Preview Period | The current event of the currently watched service is an IPPV event, and it is in preview. | IPPV |
E24 | E24-12 Preview Period Expired | The current event of the currently watched service is an IPPV event and the preview period has expired. Decision on whether still purchasable is indicated by other methods. | IPPV |
D25 | D25-12 Event already purchased | The IPPV event has already been purchased. | IPPV |
D26 | D26-12 Event is recorded | The first time that the viewer surfs onto an IPPV event, the Smart Card records this event in its database. | IPPV |
E27 | E27-12 No further purchases possible | The viewer has surfed onto an IPPV event for the first time and the Smart Card cannot store the event in its database as it is full. The IRD should attempt a call-back session. | IPPV |
E28 | E28-12 Credit Limit Reached | The viewer has attempted to purchase an IPPV event, however there is not enough credit on the Smart Card. The IRD should attempt a call-back session. | IPPV |
D29 | D29-4 Service is currently descrambled | The currently watched service is being descrambled successfully. | Smart Card |
E30 | E30-4 Service is currently scrambled | An authentication failure occurred during ECM submission by SoftCell to the Smart Card. This is due to a key mismatch between the playout and the Smart Card. | Smart Card |
E30 | E30-4 DRM authentication failure | Authentication of DRM data failed, which is either Content Rights, Rights Record, or Sequence Record. | Session Management DRM |
E32 | E32-4 Viewing is temporarily blocked, please stay tuned | The viewer is not entitled to watch this service because surf locking is active. | Smart Card |
E33 | E33-4 Invalid Smart card | Incorrect Smart Card (CI-Layer mismatch). | Smart Card |
E33 | E33-4 Invalid Smart Card | Ci-Layer failure. | Session Management DRM |
I34 | I34-9 Service is currently scrambled | The scrambling status was not determined yet. | ECM Source |
E35 | E35-32 Service is currently scrambled | The IRD has requested the CAM to descramble a service, but the CAM does not respond with a descramble status (No Service Define Reply). This is typically due to the absence of ECM playout. | optional |
E36 | E36-32 Smart Card Not Compatible | There is a field on the Smart Card indicating the type of IRD that card is suitable for. This could be DTH, monitoring or Profdec. This message occurs if there is an incompatibility between the Smart Card field and the IRD into which the card has been inserted. | optional |
E37 | E37-32 Service Unknown | Occurs under the following conditions:There is an attempt to change to a channel (by directly entering the channel number) and no service is located at that channel number.There is no entry for the required service ID in the PAT on the transport stream that has been tuned to.There is no PAT on the transport stream that has been tuned to. | optional |
E38 | E38-32 Service is not currently runningorE38-32 Service is not running | Occurs under the following conditions:There is no PMT for the service.Running status of the service is set to NOT RUNNING in the SDT, see also the detailed explanation following this table.The service that is being watched gets dropped from the Service List descriptor in an operator’s BAT, or from the SDT.If the service is an Irdeto scrambled service, the CA-Task must send a Service Clear to SoftCell to clear this service; video should be blanked. | optional |
E39 | E39-32 Locating Service | Occurs when the service that is being watched is moved to a different transport stream. This could be deduced by any one of the following:Transport stream ID for the relevant SDT has changed.Transport stream ID of the PAT has changed.Service list descriptor containing the service is attached to a transport stream other than the transport stream currently tuned to. This would be indicated in the NIT or BAT for a specific operator. | optional |
E40 | E40-32 Decoder Memory Full | Decoder Memory Full | optional |
E41 | E41-32 Service is not currently available | May occur when the IRD retrieves the PAT or PMT and the current event of the currently watched service is not allowed in the country, as per the definition of E43 (Not Allowed in this Country). | optional |
E42 | E42-32 Parental Control Lockand/or Ask for Parental PIN | Occurs under the following conditions, see also Appendix D: When the parental rating of the event is greater than the IRD setting that has been made via the Parental Control menu.When manually blocking the current event of the currently watched service. When the EIT does not contain a parental rating descriptor, but only if the IRDs parental rating is not the maximum (Unblocked). | mandatory if parental rating is supported |
E43 | E43-32 Not allowed in this country | Occurs under the following conditions, see also Appendix E:The currently watched service is not allowed in the country indicated by the Smart Card. This is determined from a country availability descriptor in the SDT.The current Bouquet is not allowed in the country indicated by the Smart Card. This is determined from a country availability descriptor in the BAT. | Optional |
E44 | E44-32 No Event Information | An EIT for the current event of the current service has not been received, but only if the IRDs parental rating is not the maximum (Unblocked), see also Appendix D. | mandatory if parental rating is supported |
E45 | E45-32 Service not allowed | An attempt is made to tune to a service on a transport stream, which is blocked by the mux verifier. | optional |
E46 | E46-32 Reading Satellite Information | Reading Satellite Information, searching SI | optional |
E47 | E47-32 Bouquet Block | Bouquet Blocking | optional |
E48 | E48-32 No SignalorE48-32 Searching for signal | Occurs when the front-end reports a loss of signal.This error message only applies to a momentary loss of signal. When the signal has been lost for longer than 30 seconds, the E52 banner should appear instead of E48. | optional |
E49 | E49-32 LNB Overload | Occurs when the current drawn out of the front-end (to power the LNB) is excessive. | optional |
E50 | E50-32 No Services available | An attempt is made to change to a service list of a particular type (e.g. TV, Audio) and there are no services of that type available in the bouquet. | optional |
E52 | E52-32 Searching for signal | Occurs when attempting to tune to a service on a transport stream that cannot be found (e.g. because the service has moved to a new frequency), or if the signal drops away. The following steps occur: “E48 No Signal” or "E48 Searching for Signal" message comes up. If, after ±30 seconds, a signal has not been found, the “E52 Searching for Signal” message will come up as the IRD cycles through transport streams in its database, attempting to establish a lock-on. The IRD must try to lock on the same service on the new frequency, if the service is not found, continue cycling. | optional |
E53 | E53-32 Incorrect Pin | The viewer has attempted to purchase an IPPV event and has entered the wrong pin. | optional |
E54 | E54-32 IPPV OK | Internal message when IPPV purchase is successful. This message will not be displayed on the screen. This code is replaced by E22. | obsolete |
I55 | I55-4 Subscriptions are expiring very soon. | All products expired, still can continue descrambling until grace period ends. | Smart Card |
E56 | E56-32 CAM not compatible | The CAM is not compatible with the IRD MPEG electrical interface. | optional |
E57 | E57-32 Unknown Channel | Unknown Channel | optional |
E58 | E58-32 channel not currently available | Channel not currently available | optional |
E64 | E64-32 Invalid tuning parameters | Occurs when there is an attempt to tune the front-end to a frequency outside the capability of the IRD. Typically this occurs if the tuning parameters have been entered incorrectly, or if invalid tuning information is played out in the NIT. The difference between the tuning frequency and the LNB frequency is outside the capability of the front-end. | optional |
E66 | E66-32 Service is currently blocked | Service is blocked due to Operator requirement to check for valid subscription on Smart Card. | optional |
E67 | E67-32 Please insert Nagravision smart card | Reserved for manufacturer use. | optional |
E68 | E68-32 Nagravision smart card not inserted correctly | Reserved for manufacturer use. | optional |
E69 | E69-32 Free-to-air service is blocked | Reserved for manufacturer use. | optional |
E70 | E70-32 This service is unavailable on your second TV | If a service ONLY contains elementary streams that are NOT available on the secondary TV, then this message should be displayed. e.g.: On an OpenTV STB, the secondary might not support OpenTV applications. | optional |
E71 | E71-32 Song title and Artist information cannot be viewed | Require for Multichoice Africa Multiview STBDisplayed on services, which would display the DMX application on the primary TV | optional |
E72 | E72-32 Rescan in progress. Please wait | The Service Database, is being rebuilt. Thus not possible to present AV on the secondary TV | optional |
E73 | E73-32 TVLink Overload | Occurs when the current drawn out of a TVLink supporting remodulator, is excessive. Only required on STBs that support the TVLink module. | optional |
E74 | E74-32 LNB1 Overload | Occurs when the current drawn out of the primary front-end (to power the LNB) is excessive. | optional |
E75 | E75-32 LNB2 Overload | Occurs when the current drawn out of the secondary front-end (to power the LNB) is excessive. Only supported on STBs with TWO satellite inputs. | optional |
E76 | E76-32 TV2 Disabled. Please contact customer services | When the Multiview product is NOT found on the Smart Card, the secondary AV should be disabled and this banner displayed. | Mandatory for Multiview |
E80 | E80-35 Service is currently scrambled | No de-Tweak key received for Custom CA Yet. | Custom CA Module |
E81 | E81-35 Service is currently scrambled | De-Tweak key mismatch. | Custom CA Module |
D82 | D82-42 Event Purchased | The current event of the currently watched service is an LPPV event, and it has been purchased. | LPPV |
D83 | D83-48 Preview Period | The current event of the currently watched service is an LPPV event, and it is in preview. | LPPV |
D85 | D85-48 Event already purchased | The LPPV event has already been purchased. | LPPV |
E87 | E87-48 Ticket Record Store Full | Smartcard cannot store the ticket in its database as it is full. The IRD shall attempt a ticket delete action. | LPPV |
E88 | E88-48 No Order | The current event of the currently watched service is an LPPV event, without order and the preview period has expired. | LPPV |
E89 | E89-48 No Buy Window | Ticket order found, but no buy window and buy window ignore is not set for the ticket order | LPPV |
E91 | E91-48 Credit Limit Reached | STB purchases an LPPV ticket, however there is not enough credit on Smartcard. | LPPV |
E92 | E92-48 Too Expensive | The actual ticket cost exceeds order cost. | LPPV |
E93 | E93-49 Wrong PPV Mode | The PPV parameter does not match the operation mode that SoftCell sets. If the event is not purchased yet when the valid PPV ECM arrives, SoftCell will send E93 in the following 2 situations: It works on the mode of LPPV but the smartcard received the IPPV parameter; It works on the mode of IPPV but the smartcard received the LPPV parameter. | LPPV |
D100 | D100-3 Service Ok | Service Ok. | SoftCell 3 Service |
D100 | D100-5 DVB EMM Service Ok | Service Ok. | DVB EMM Service |
D100 | D100-6 EMM Source Ok | DVB EMM source Ok. A valid EMM PID was found and filters have been set-up. | EMM Source |
D100 | D100-8 Descrambler Service Ok | Service Ok. | DVB Descramble Service |
D100 | D100-9 ECM Source Ok | DVB ECM Source Ok. | ECMSource |
D100 | D100-27 PVR Record Service Ok | Service Ok. | PVR Record Service |
D100 | D100-28 PVR Playback Service Ok | Service Ok. | PVR Playback Service |
D100 | D100-30 0k | Ok. | PVR Encryption |
D100 | D100-31 0k | Ok. | Copy Control |
D100 | D100-36 PVR DRM Service Ok | Service Ok. | PVR DRM Service |
E100 | E100-2 Bad Op-code or Sequence | The used op-code is unknown or the used sequence number for the reply was not used by the failing message. | SoftCell 3 Core |
E100 | E100-4 Service is currently scrambled | The viewer is not entitled to watch this service because the date code on the card has gone backwards. | Smart Card |
D101 | D101-6 No Match | No EMM PID could be found matching the Smart Card's vendor ID. No EMMs will be filtered. | EMM Source |
D101 | D101-9 No PMT | The PMT has not yet been included in | ECMSource |
E101 | E101-3 Incomplete Definition | The Service is not defined sufficiently. This occurs if critical modules have not been defined for a particular service or if incorrect use is made of the Service Definition syntax. | SoftCell 3 Service |
E101 | E101-4 Service is currently scrambled | The viewer is not entitled to watch this service because the sector number in the ECM playout is not on the Smart Card. | Smart Card |
E101 | E101-5 Incomplete Definition | The service isn't defined sufficiently. Probably some modules still need to be defined. | DVB EMM Service |
E101 | E101-8 Incomplete Definition | The service isn't defined sufficiently. Probably some modules still need to be defined. | DVB Descramble Service |
E101 | E101-27 Incomplete Definition | The service isn't defined sufficiently. Probably some modules still need to be defined. | PVR Record Service |
E101 | E101-28 Incomplete Definition | The service isn't defined sufficiently. Probably some modules still need to be defined. | PVR Playback Service |
E101 | E101-30 PVR Encryption not available | PVR Encryption Resource not available. | PVR Encryption |
E101 | E101-31 Resource unavailable | Copy Control Resource not available | Copy Control |
E101 | E101-36 Incomplete Definition | The service isn't defined sufficiently. Probably some modules still need to be defined. | PVR DRM Service |
F101 | F101-2 Incomplete Definition | The handle (Service, event, resource) used in the message did not exist or one of the other parameters is invalid. | SoftCell 3 Core |
D102 | D102-9 No Vendor ID | There is no vendor ID (card is not in and verified). | ECM Source |
D102 | D102-30 Key not Loaded | No valid key available. | PVR Encryption |
I102 | I102-4 Unspecified Status | The Smart Card returned a status that is not handled by SoftCell. | Smart Card |
E102 | E102-6 Out of EMM Filters | No, or not enough, filters are available. No EMMs will be filtered. | EMM Source |
F102 | F102-2 Format Error | The format or size of the message is incorrect. | SoftCell 3 Core |
D103 | D103-6 No CAT | No CAT is defined or the CAT was empty. No EMMs will be filtered. | EMM Source |
D103 | D103-9 Service is currently scrambled | SoftCell has not yet determined the descrambling status. | ECM Source |
D104 | D104-6 No Vendor ID | There is no vendor ID (card is not in and verified). No EMMs will be filtered. | EMM Source |
E104 | E104-9 Out of ECM Filters | No, or not enough, filters are available. No ECMs shall be filtered. Descrambling not possible. | ECM Source |
D105 | D105-9 FTA Service | This service is deemed to be free-to-air because there are no CA Descriptors in the PMT. | ECM Source |
E105 | E105-6 Out of Channels | Channel open error. There are no channels left on this resource. No EMMs will be filtered. | EMM Source |
D106 | D106-6 No Owner ID | (For Multiple Smart Cards Support only.) There is no Owner ID (card is not in or verified).No EMMs will be filtered. | EMM Source |
E106 | E106-9 Service is currently scrambled | This stream is scrambled by an alternate vendor with non-matching CA System ID | ECM Source |
E107 | E107-4 Service is currently scrambled | The Smart Card and STB are not matched. | Smart Card |
E108 | E108-4 Service is currently scrambled | An authentication failure occurred during ECM submission by SoftCell to the Smart Card. This is due to Patch Filter fails. | Smart Card |
E109 | E109-4 The CCP version is not supported | CCP version is not supported by the smartcard. | Smart Card |
E110 | E110-37 Unknown Irdeto PVR phase | Unable to decide based on which Irdeto PVR phase the session is going to be managed. This happens at record when Irdeto Smart Card is not inserted, or inserted but SoftCell is unable to detect whether the card supports DRM; or at playback when SoftCell can not retrieve session record or the session record indicates that same error happened at record time. | Session Management DRM |
E111 | E111-37 Recording key error | PVR content encryption key error. This happens when SoftCell fails to get the key from Smart Card for record or playback. | Session Management DRM |
E112 | E112-37 PVR not allowed | Non-PVR-able flag is set, disallowing PVR operations, including both recording and timeshifting (pause TV). | Session Management DRM |
I113 | I113-37 Acquiring initial content rights | At start of recording, SoftCell is acquiring content rights. This is an intermediate state. | Session Management DRM |
I114 | I114-37 Acquiring initial content rights | At start of recording, SoftCell is trying to connect to the ECM page search of the descramble service in order to get ECM containing content rights. This is an intermediate state. | Session Management DRM |
E115 | E115-37 Chain recordings failure | Chaining recordings failed, because SoftCell can not get necessary information from the session where the first part of the recording had been made.Note: upon this error, no further recording in this session can be done. Have to stop the session and open a new session to either re-attempt chaining or do normal record without chaining. | Session Management DRM |
D116 | D116-37 Peeking content rights | Playback peek rights only. No real playback (rights adaptation, key setting) being performed. | Session Management DRM |
E116 | E116-4 SoftClient has been repudiated | SoftClient has been repudiated. | Smart Card |
E117 | E117-4 Maturity Rating blocked. This SoftCell does not support Maturity Rating | The current event is Maturity Rating blocked. This version of SoftCell does not support Maturity Rating | Smart Card |
E117 | E117-37 No more playback session available | No more playback session can be opened. | Session Management DRM |
E118 | E118-4 Smartcard minimum ci-layer level mismatch | Ci-layer type indicator in ECM header is higher than current built up Ci-layer. | Smart Card |
E118 | E118-37 Permanent recording is not allowed | Non-PVR-able flag is not set while copy control is CopyNever, disallowing permanent recording. (Note: In this condition, Timeshift recording is allowed). | Session Management DRM |
E110 to E115;E119 to E123 | Exxx-4 Reserved Smart Card return code(Exxx shall be E109 to E123) | Reserved error message for future Smart Card return code. | Smart Card |
E124 | E124-4 Service is currently scrambled | The Smart Card and STB are not matched owing to crypto calculation mismatch. | Smart Card |
D126 | D126-4 PVR DRM OK | PVR DRM OK. | Session Management DRM |
E127 | E127-4 Playback is not allowed | Playback not allowed due to Rights Record version error. | Session Management DRM |
E128 | E128-4 No PVR subscription | No PVR subscription. | Session Management DRM |
E129 | E129-4 Outside viewing window | Playback not allowed outside viewing window. | Session Management DRM |
E129 | E129-4 Service is currently scrambled | The viewer is not entitled to watch this service because it is outside the viewing window. | Smart Card |
E130 | E130-4 PVR is not allowed | Non-PVR-able flag is set, disallowing PVR operations, including both recording and timeshifting (pauseTV). | Session Management DRM |
E131 | E131-4 No PVR MSK | PVR MSK not available on Smart Card. | Session Management DRM |
E132 | E132-4 No more playback session available | No more available playback sessions . | Session Management DRM |
E133 | E133-4 Service is currently scrambled | The viewer is not entitled to watch this service because the ECM timestamp expired. | Smart Card |
E133 | E133-4 Unable to acquire content rights | The timestamp of the ECM carrying content rights expired. | Session Management DRM |
E134 | E134-4 Number-of-playbacks limit exceeded | Number-of-playbacks limit exceeded. | Session Management DRM |
E135 | E135-4 Record is not allowed | Copy control disallows permanent copy. | Session Management DRM |
E136 | E136-4 Maturity Rating blocked | The current event is Maturity Rating blocked. PIN for user profile of sufficient age needed to unblock.(Together with the Maturity Rating Resource status this is a trigger to prompt for user PIN input to overrule the block.) | Smart Card |
E136 | E136-4 Maturity Rating blocked | The current event is Maturity Rating blocked. PIN for user profile of sufficient age needed to unblock.(Together with the Maturity Rating Resource status this is a trigger to prompt for user PIN input to overrule the block.) | Session Management DRM |
E137 | E137-4 Maturity Rating PIN Error | The current event is Maturity Rating blocked. The MR profile ID on the card is not in the ECMs. | Smart Card |
E137 | E137-4 Maturity Rating PIN Error | The current event is Maturity Rating blocked. The MR profile ID on the card is not in the ECMs. | Session Management DRM |
E138 | E138-4 Maturity Rating PIN blocked | The current event is Maturity Rating blocked. User PIN input is temporarily blocked. (Maximum number of retries reached. Further retry must wait until the blocking times out.) | Smart Card |
E138 | E138-4 Maturity Rating PIN blocked | The current event is Maturity Rating blocked. User PIN input is temporarily blocked. (Maximum number of retries reached. Further retry must wait until the blocking times out.) | Session Management DRM |
I139 | I139-4 Regional info is requested | Waiting for Regional Filtering information. | Smart Card |
E140 | E140-4 Regional blocked | Regional Blocking. | Smart Card |
E141 | E141-4 Home gateway disallowed | Home Gateway Proximity Control disallows the smartcard to be used for descrambling in the decoder. | Smart Card |
E142 | E142-4 Home gateway HNR expired | Home Gateway Proximity Control HNR timer expired on the smartcard. No descrambling. | Smart Card |
E143 | E143-4 Home gateway HNA expired | Home Gateway Proximity Control HNA timer expired on the smartcard. No descrambling. | Smart Card |
E144 | E144-4 Wrong Home Network | Home Gateway Proximity Control (HGPC) active SoftCell (primary or secondary role) refuses the card, because the card is HGPC active but doesn’t belong to the home network. | Smart Card |
E145 | E145-4 Sector based Dual View product check failed | Sector based Dual View product check failed. No descrambling. | Smart Card |
D200 | D200-4 No card ready | (For Multiple Smart Cards Support only.)The stream is scrambled, but no card is ready for PMT parsing: either not in or blocked. | Smart Card |
D200 | D200-4 Smart Card is not selected by service | (For Multiple Smart Cards Support only.) The Smart Card is in and is a valid Irdeto Smart Card, but is inactive for the service it belongs to, for example, not targeted to descramble the program due to Owner ID mismatch. In case the card belongs to a secondary operator, this status also implies that it’s not blocked by business rule. | Smart Card |
E200 | E200-37 Targeted card is unknown | (For Multiple Smart Cards Support only.) The targeted card is unknown from the dependencies, including:- At recording, the connected DVB Descramble Service, whose service handle is passed in the resource define, can’t find a card to do descramble which is supposed to do the recording too (except for FTA program for which card is selected by DRM service directly.);- At playback, no information of the Smart Card which was used during recording can be found as the targeted Smart Card for playback (except for legacy recordings, for which primary card is assumed to be the card for playback). | Session Management DRM |
E201 | E201-4 Service is currently scrambled | (For Multiple Smart Cards Support only.)The stream is scrambled, but no card matches Vendor ID + Owner ID among the cards ready for PMT parsing. | Smart Card |
E201 | E201-4 Smart Card is blocked by business rules | (For Multiple Smart Cards Support only.)The Smart Card is blocked, although the card is in and a valid Irdeto card. due to the business rules, which currently include: - Secondary card must be enabled in order to do descramble or PVR DRM.- Secondary card can only work when primary card is in.- Special form of primary card, like SMD card, may be overridden by non-SMD primary card. | Smart Card |
E201 | E201-37 Targeted card is not in resource list | (For Multiple Smart Cards Support only.) The targeted card is not in the Smart Card resources defined for the service. | Session Management DRM |
E202 | E202-37 Targeted card is blocked by business rules | (For Multiple Smart Cards Support only.) The targeted card is blocked by business rules. | Session Management DRM |
E203 | E203-37 No card is ready to record FTA event | (For Multiple Smart Cards Support only.) No card is ready to record the FTA event to be recorded: either not in, or no PVR/DRM subscription, or blocked by business rules. | Session Management DRM |